[. . . ] Other locations can be dangerous as the rear of the system heats up during use. To avoid short-circuit: before you connect, make sure that the ign tion is off. Make sure that you connect the yellow and red power supply leads after all other leads are connected. Make sure that the leads do not get caught under screws iron parts that will move (e. [. . . ] Connect an MP3 link cable to • the MP3-LINK socket on the system. €¢ the audio output socket (usually the headphone socket) on the external device. Care of the environment Set clock 1 2 3 Press and hold Rotate Rotate until [CLK] is displayed. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet. ) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Select a source 4 All registered and unregistered trademarks are property of their respective owners. 0 ISO male connectors 1 2 3 Green strip, black-edged green strip White strip, black-edged white strip Gray strip, black-edged gray strip Purple strip, black-edged purple strip Red strip Blue strip Blue strip, white strip Black strip Yellow strip Connect to Rear left speaker Front left speaker Front right speaker Rear right speaker Ignition key +12V DC when ON/ACC Motor/electric antenna relay control lead Amplifier relay control lead Ground To the +12V car battery which is energized at all times Note Slide the unit into the dashboard until you hear a “click”. €¢ • • [MP3--LINK]: Listen to the audio input through the MP3-LINK socket. 1 2 3 Press and hold to activate the setup of customized sound equalizer. EN 4 e f g h i 5 Listen to radio 9 1 Safety Store radio stations in memory Trademark notice Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. €¢ The device is designed for negative ground (earth) 12 V DC operation only. €¢ To ensure safe driving, adjust the volume to a safe and comfortable level. [. . . ] 10 Product Information Note • • Never remove the casing of this product. Attach the front panel d e f 1 2 3 4 Sockets on rear panel For ISO male connectors BACK LINE OUT R BACK LINE OUT L ANTENNA External sockets or connectors As indicated above Rear right speaker Rear left speaker Antenna 1 2 Press and hold Press or or until the [M] is blink. €¢ Specifications are subject to change without prior notice. When you contact Philips, make sure that the product is nearby and the model number and serial number are available. [. . . ]